background image

10

10

9

9

10~25 

25~35

35~50

50~70

16 L

24 L

30 L

36 L

47 L

54 L

60 L

42 L

1    

1    

2    

2    

3    

3    

44

Preparation:
Connect the Drain Hose. Connect the Water Supply Hose to the faucet and turn the 
faucet on. Plug the Power Cord into a socket-outlet.Load the laundry into the washer. 

·

Make sure that screws of "Magic" Hose Joint are tighten before opening the faucet. If 

  

screws are loose, it may cause water to leak.

DETERGENT  AND  LOAD  RECOMMENDATIONS

DETERGENT  AND  LOAD  RECOMMENDATIONS

Water Volume

Water Volume

(Approx. L)

Water Level

Water Level

Detergent 
Indicators

Detergent 
Indicators

You may adjust the detergent volume according to the type of 
detergent-follow recommendations on package.

Other detergent 
volume

Other detergent 
volume

Powdered 
detergent 
volume (g)

Powdered 
detergent 
volume (g)

HOW TO USE THE BLANKET COURSE

HOW TO USE THE BLANKET COURSE

For washing blanket and other bulky items.

·

The water level will be changed to 8 automatically when BLANKET course set. While 

    you can adjust it from level 5 to level 8 by hand according to the blanket or the bulky 
    items size.

1.Press POWER ON/OFF button and open the washer lid.
2.Press COURSE button continuously and choose the BLANKET course (The BLANKET 
   Light flashes).
3.After the detergent is dissolved with proper amount of warm water (approx. 30

), pour 

   it into the tub of the washing machine.
4.Fold up the blanket as the method showed in the figures below and put it into the 
   washing tub.
5.Press the START/PAUSE button.
6.Close the washer lid.

·

The washer will stop working automatically before spinning if the washer lid is not 

    closed. 

·

The buzzer will alarm at the end of operation and the power will be switched off 

    automatically in 5 seconds. 

·

Then please shut water supply and clean the filter.

1.Press the POWER ON/OFF button.
2.Press the START/PAUSE button. 

·

Sensor tests the clothes weight automatically. ( For NORMAL, HEAVY DUTY, 
CUSTOM). Auto choose the proper Water Power, Water Level, Wash and spin time, 
rinse type.

3.

  
  

Use recommended amount of detergent as shown in chart.

Put it into the wash tub with 
the edge downwards

Fold in two by the 
long side

Fold 4 times in the 
same direction

Roll up the blanket.

4.Close the washer lid.
● The washer will alarm and stop working before spinning if the washer lid is not closed.

● You can use softener, pour the softener slowly to Softener Dispenser before washing.
● Too much detergent causes poor rinsing and too little detergent causes poor washing.

Procedure

Take out blanket and hang it up. 

NOTICE:

Clean the dirty side by hand firstly.
Use proper volume detergent.
It is better to clean dirty by warm water (approx. 30

).

·
·
·
·

If the blanket floats out during washing, please press START/PAUSE button, the 

    washer will stop working temporarily. Then, please push the blanket down, and press 
    START/PAUSE again to continue washing.

How to fold up the blanket and put it into the washing tub.

NORMAL USAGE

NORMAL USAGE

Procedure

Wash Finish

1

2

Summary of Contents for ASW-A100HT











Reviews: