5
For Tower Type
（１ｋＶＡ）
（2ｋＶＡ
/
3ｋＶＡ ）
⑥
Remove the tape from the battery connector on the new battery pack and attached it to the used battery pack connector.
⑦
Insert the new battery pack into the UPS.
⑧
Plug in the battery connector.
②
Loosen the screw and slide
the battery cover in the
direction of the arrow. The
screw is a fall prevention
screw, so it can’t come off
the battery cover.
For service personnel only
③
Slide the switch to
｢
Bypass
｣
⑤
Pull out the battery
pack
out.
④
Disconnect the battery conn
ector.
⑥
Attach the tape and insulate
it.
For service personnel only
③
Slide the switch to
｢
Bypass
｣
④
Disconnect the battery
connector.
⑥
Attach the tape and
insulate it.
⑤
Pull out the battery pack out
①
Remove by sliding in
the direction of the arrow
by holding two places of
strongly.
①
Remove by sliding in the
direction of the arrow by
holding two places of
●
strongly.
②
Loose the screw, slide the battery cover
up, and pull forward.
