56
Fig. 4-6
Remove 2
s
crew
s
T
u
bi
ng
cover
Bottom
Fro
n
t
Remove 11 pa
n
el
s
crew
s
from fro
n
t
pa
n
el
U
s
e c
u
tti
ng
plier
s
or
s
imilar
tool to c
u
t cover o
u
t
Fig. 4-5
Indentation
(4 locations)
Slit hole
4-3. Routing the Tubing
The tubing can be routed out either from the front or from the bottom. (Fig. 4-6)
The connecting valve is contained inside the unit. Therefore, remove the front panel. (Fig. 4-6)
(1) If the tubing is routed out from the front, use cutting pliers or a similar tool to cut out the tubing outlet slit (part indicated
by
) from the tubing cover. (Figs. 4-5 and 4-6)
(2) If the tubing is routed out from the bottom, remove the
slit part (
).
Use a drill bit approximately 13/64 dia. to create holes at
the 4 slit hole indentations (openings).
Punch out the slit part (
).
Be careful not to damage the base plate.
07-007 W-2WAY_II_NA 1/23/07 6:09 PM Page 56
