SY135C Excavator
Machine Controls
SANY
Operation and Maintenance Manual — 0120
3-49
TABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
S
P
E
CI
F
ICA
T
ION
S
OP
T
IO
N
A
L
EQUI
PMENT
Main Menu Screen
0004116
Fig. 3-59
1
6
2
3
4
5
NOTE:
The Main Menu screen displays icons for
various options that can be accessed via the
function icons and buttons at the bottom of
the screen. Each icon will be highlighted as it
is selected.
1. Press the F1 function button (6) or the arrow buttons
(5) to select the desired menu items.
•
Running Information – selecting the Running
Information icon displays:
•
Engine and Throttle Signals screen – see “Engine
and Throttle Signals Screen” on page 3-50.
•
Pilot Pressure Signals screen – see “Pilot Pressure
Signals Screen” on page 3-52.
•
Main Pump and Main Valve Signals screen – see
“Main Pump and Main Valve Signal Screen” on
page 3-53.
•
Input Switch Signals screen – see “Input Switch
Signals Screen” on page 3-54.
•
Output Switch Signals screen – see “Output
Switch Signals Screen” on page 3-55.
•
Machine Configuration – see “Machine Configuration
Screen” on page 3-56.
•
Failure Information – see “Failure Code Screen” on page 3-57.
•
GPS Information – see “Global Positioning System (GPS) Information Screen” on page 3-58.
•
Language Information – see “Language Selection Screen” on page 3-59.
•
Maintenance History – see “Maintenance History Screen” on page 3-60.
2. Press the Enter button (4) or the F4 function button (2) to accept the selection.
Press the F3 function button (1) to proceed to the Tool Selection screen. See “System Time Display” on page 3-47.
Press the F5 function button (3) to return to the previous screen.
