Sanwe SW-3304, User Manual, Page: 12 / 19

Jiangsu Sanwe Medical Science and Technology Co.,ltd. User's manual
11
4.2
4.2 4.2
4.2 Startup
Startup Startup
Startup and
and and
and shut
shut shut
shut down
down down
down direction
direction direction
direction
1). Turn on power switch of host computer first, then turn on monitor and system
switch, now the light source of video camera is on, wait for a little while when
microcomputer starts up. Then the monitor plays WINDOWS interface.
2). Double click “Colposcope” icon, choose “new case” and it will show the image
shoot by video camera and patient’s information dialog box immediately. (Please read
“Instruction of the digital electronic colposcope software” carefully).
3). Shut down: Click “exit” to back to WINDOWS interface, then open “Start” menu
to chose “shut down”, chose it and the whole system can be shutdown.
Notice:
Notice: Notice:
Notice:
Never make power-off to shut down unless system halted or other special
situation happened.
4) Pull off the outer power plug to make sure the machine separated from power
supply, and then cover the covering cloth.
Chapter Chapter Chapter Chapter 5 5 5 5 Instruction Instruction Instruction Instruction
5.1 5.1 5.1 5.1 Examination Examination Examination Examination method method method method
1). Turn on the apparatus to ensure “image set up” is under real-time display status.
2). Specimens before 24 hours, prohibit any vaginal stimulation, such as sexual
intercourse, vaginal examination, and local irrigation, pesticides, so as not to affect
the results of the inspection. Any inflammation should be controlled first.
3). Make subjects get dorsosacral position, use vaginal dilator to expose cervix (do
not use lubricants in order to avoid affecting the observation)
4). Use cotton balls with normal saline to wipe out cervical secretions (inunction can
not be forced, so as not to prevent bleeding that may affect the observation)
5). Cameras will be moved away from the cervix about 15-20CM, genital distance
about 5-10cm, adjust focal length to enlarge image to observe.
6). Sometimes in order to further distinguish the contraction of blood vessels respond
between the surface of cervical squamous cell or columnar epithelium to determine
the nature of the Cervical lesions on the surface, the surface of the cervix to be
applied in a number of medicines in order to make the image more clearly and more
conducive, which must good for diagnose. For example:
●3% acetum: after use this most common solution on cervix, the columnar epithelium
rapidly goes to be edema, white, and showing a typical "grape cluster" form, but not