Sanwa M53, Instruction Manual

Page: 32 / 40

−
11
−
Fig. 6
To SE-9000 analog output
[5] Maintenance & Management
WARNING
This section contains important information for maintenance. The
maintenance of the instrument should be performed by managing
personnel who understand the instrument and this manual in detail,
and who are well-acquainted with handling the instrument.
5-1 Maintenance & Inspections
WARNING
Be sure to maintain and inspect to ensure safe, long-lasting
optimum-performance use of the instrument.
4-7 Speed(m/min) measurement
1. The measurement method is the same as DCV measurement, but
set the function switch to DCV 0-20 V.
2. As shown in Figure 6, connect optional cable of SE-9000 (speed
meter), positive red plug to the right side of L terminal, and negative
black plug to E terminal.
3. Press power switch, and then analog output value from speed meter
will be shown on the display as mV value. Read that value directly
as m/min.