Congratulations on your purchase of this most innovative wired trackball laser mouse. Equipped with
Auto-Speed technology, the mouse can automatically adjust the cursor speed to precisely get to the
point you want. Furthermore, just rolling the ball to freely control the cursor movement, no need to
move the mouse, can reduce the use of the wrist and the incidence of carpal tunnel syndrome. It
offers more advance that will make you more productive and more comfortable.
Using state-of-art technology. High tracking speed and sensitivity.
Auto-Speed technology. - automatically adjust your cursor speed to precisely get to the point you want.
Ergonomic design to support your hand in comfort.
4-way scrolling.
Ergonomic design.
400/800/1200/1600 dpi switchable.
2 side buttons for Internet Explorer Forward & Backward.
Mouse
Features
Introduction
1.Hardware Installation
a. Turn on your PC.
b. Connect the receivere to USB port on PC.
Wheel button
Dpi button
Forward button
Backward button
Trackball
This product complies with IEC 60825-1, Class
I
laser product.
The product complies with FCC and CE rules.
Safety Notice
Please do
NOT
direct the laser beam at
anyone's eye after the ball is taken out.
2. 4-Way Scrolling:
a. Vertical Scrolling
Roll wheel up to scroll up; roll wheel down to scroll down.
b. Horizontal Scrolling
Hold the wheel to left to scroll left; hold the wheel to right to scroll right.
Release wheel to stop scrolling function.
Note
The 4-way scrolling function depends on applications. If the application support the 4-way scrolling function,
then the mouse will perform it.
3. Red LED as DPI indicator
Blink once when switched to 400 dpi
Blink twice when switched to 800 dpi
Blink 3 times when switched to 1200 dpi
Blink 4 times when switched to 1600 dpi
Red LED indicator
4. Clean the trackball
You may use a pen, through the hole at the mouse
bottom, to push out the trackball and clean it.
PC
USB port
Important Notes
Please follow the instructions contained in the instruction manual. Do not try to
disassemble or replace parts in the product.
Do not put the product in water or no any wet surface; if this occurs quickly remove from
the computer and take to your nearest dealer for repair.
To avoid electrocution, please do not pick up the device when your hands are wet.
Do not put the product near a heat source or put the product in high temperatures.