Sanwa DCL1000, Instruction Manual, Page: 7 / 23

— 4 —
[3] NAMES AND FUNCTIONS OF COMPONENT UNITS
3-1 Names and Functions of the Meter and Test Leads
Testpin
Finger guard
Test probe (black)
Plug
Test probe (red)
Clamp type current sensor (CT)
Accuracy guarantee range mark
Center position mark
Barrier
Open/close lever
Display
A sensor to clamp a conductor to
measure. (“Clamp sensor”)
A range to clamp a conductor to measure
which is guaranteed for accuracy. (See 5-2)
A convex part to prevent fingers from touching an
object to measure during measurement of current.
A lever to open and close the clamp sensor.
An LCD to show measured values, etc.
DCL1000_英本文_三 06.4.14 6:54 PM ページ 4