− 19 −
①
②
③
④
Fig 3
No problem.
Start measurement.
④
Short the red and
black test pins.
③
Set the function
switch at
●
.
①
Connect the test
lead of black plug to
the COM terminal.
②
Connect the test
lead of red plug to
the
●
terminal.
START
Main unit and
test leads
damaged?
Display shows
00.0
〜
1.0?
Damaged
No damage
No
Yes
▼
▼
▼
▼
▼
▼
▼
▼
Stop using it and
have it repaired.
Check continuity of
test leads.
▼
▼
▼
5-2
Voltage measurement Maximum rating input value 1000VDC or 750VAC
1.Never apply an input signals exceeding the maximum rating input
value.
2.Be sure to disconnect the test pins from the circuit when chang-
ing the function.
3.Always keep your fingers behind the finger guards on the probe
when making measurements.
WARNING
