4
5. Step-by-step instructions
WARNING
Before performing any of the instructions below, make sure the unit is turned OFF
and unplugged from power.
5.1 Open the SRMax ballast box
Step
1. Take the SRMax out from the ductwork by
removing the 4 screws located on the cover (4
corners) that hold it to the frame
2. Place the SRMax down on a flat surface,
remove the 4 screws that attach the cover to
the ballast box and pull the cover off
5.2 Test UV lamp continuity
Step
1. Take the SRMax out from the ductwork by
removing the 4 screws located on the cover (4
corners) that hold it to the frame
