4
Instruction Manual for SR Max
1-888-726-8869
www.sanuvox.com
SETUP & INSTALLATION
What you will need
A utility knife to unpack all components, a Phillips No.2 screwdriver or a drill, a measuring tape, a marker and a metal saw.
CAUTION:
Handle your product with care to avoid breaking parts. Make sure you have a free and safe space to unpack,
install and setup your product. Confirm you have access to the necessary power source for the product requirements (see unit
or system label). If you have any questions regarding the installation instructions, call SANUVOX at 1-888-726-8869.
What’s included
The SR Max with its turbulator, a UV lamp and a basic installation kit.
The installation kit includes: a UV caution decal, a maintenance decal, a pair of cotton gloves, metal screws for frame (6), Phillips
screws for cover (4) and a frame.
Step by Step Setup & Installation
Check out Sanuvox Technologies YouTube Channel
for the SR Max installation video!
1.
Prepare the SR Max for installation.
Remove the contents from
packaging. Only after you have visually inspected the UV lamp should
you break the security seal on the underside of the cardboard sleeve.
CAUTION:
Before installing or performing maintenance on the unit
or system,
TURN OFF AND DISCONNECT the unit or system from
all power sources
(there may be more than one switch to disconnect).
2. Carefully slide the
UV lamp
out from the cardboard sleeve. Be sure to
wear the
cotton gloves
(included) guaranteeing a clean lamp free from
fingerprints.
NOTE:
Fingerprints on the lamp will negatively impact the UV output of
the lamp.
STEP 1
STEP 2
