7
6
Insert the main cartridge
ECAIA main filter S
(2-E) from
above in the
ECAIA container S
(2-B) and press it into
the opening provided until it is firmly wedged into the
container. Make sure that the seals are inserted correct-
ly.
If necessary, use the additional cartridge
ECAIA nitrate
filter S
(2-H) by pushing it into the provided opening
on the top of the main cartridge
ECAIA main filter S
(2-E) until it is wedged firmly in place.
4.3
Step 3: Installation of main cartridge ECAIA main filter S
4.4
Step 4: Installation of additional cartridge ECAIA nitrate filter S
(optional)
After inserting the filter cartridges, run a few tankfuls of water through again until the fil-
tered water is clean and clear. Then let the filter cartridges regenerate for at least ten (10)
minutes. Then the
ECAIA carafe S
can be used normally and the filtered ECAIA water
can be drunk.
Note
: Sometimes the filtered ECAIA water may still contain fine carbon particles. These
emitted carbon particles are not harmful to health. If you accidentally drink some partic-
les, they will be excreted by the body without any negative effects.
4.5
Step 5: Drain of the new filter
5
Use of the ECAIA carafe S
Always fill the
ECAIA carafe S
via the opening provided
on the lid. To do this, hold the additional
ECAIA container
S
(2-B) under the water tap and open the filler flap by pres-
sing the button on the lid. Then run as much water as you
want to drink into the attachment container.
Note
: If you use the
ECAIA carafe S
in combination with
the
ECAIA tank S
(2-C), a maximum of 0.45 liters of water
may be filled into the additional
ECAIA container S
(2-B).
Then open the ceramic valve in the lower part of the attach-
ment container so that the water can run through the filters.