6901-002131 <00>
7
3
Wall Mounting - Drywall
10 mm
(3/8 in.)
3-1
Level wall plate [01] and mark hole locations
3-2
Drill pilot holes as illustrated
3-3
Tighten anchor bolts [04] only until the washer (W) is pulled fi rmly against the wall plate [01]
CAUTION:
Improper use could reduce the holding power of the
lag bolt. To avoid potential injuries or property damage: pilot holes
MUST
be drilled to a depth of 63.5 mm (2.5 in.), using a 10 mm (3/8
in.) diameter drill bit.
< 16 mm
(5/8 in.)
CAUTION:
Avoid potential personal injuries and
property damage!
Ù
Any material covering the wall must not exceed
16 mm (5/8 in.).
Ù
Do not install drywall anchors into the seam
between drywall pieces.
63.5 mm
(2.5 in.)
CAUTION:
Improper use could reduce the holding power of the
lag bolt. To avoid potential injuries or property damage:
Ù
The washer
(W)
must be between the anchor bolt
[04]
and the
wall plate
[01]
.
Ù
DO NOT
over-tighten the anchor bolts
[04]
.
3
2
1
[01]
[01]
(W)
[04]
[01]
[04]
(W)
Summary of Contents for VMFL1
Page 9: ...6901 002131 00 9 ...
