Sanus VLF525 Instruction Manual Download Page 4

4

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE

No — Perfect!

Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call  
 

1-800-359-5520  (UK:  0800-056-2853) to fi nd a compatible mount.

Please read through these instructions completely to be sure you’re comfortable with this easy install process. 
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use 
of this product, contact Customer Service at 1-800-359-5520 (UK: 0800-056-2853).

Do you have 

all the tools 

needed?

Before getting started, let’s make sure this mount is perfect for you!

1

2

3

4

What is your 

wall made of?

Unsure?

Drywall with 

wood 

studs?

Solid concrete or 

concrete

 block?

125 lb

(56.7 kg)

 

CAUTION: 

Avoid potential personal injuries and property damage! 

 

This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone

 

The wall must be capable of supporting fi ve times the weight of the TV and mount combined

 

Do not use this product for any purpose not explicitly specifi ed by manufacturer

 

Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

Call Customer Service: 
1-800-359-5520  (UK: 0800-056-2853)

Perfect!

Perfect!

Ready to 

begin?

Does your TV weigh 

more

 than 125 lb 

(56.7 kg) including 

accessories?

Para Español ver página 32

 CAUTION: 

DO NOT install 

into drywall alone

W

ood Stud Install

Concrete Install

Pencil

Screwdriver

Tape 

Measure

7/32 in.

(5.5 mm)

Wood

Drill Bit

Electric Drill

Hammer

1/2 in. 

 (13 mm)

Socket 

Wrench

Drill Bit

3/8 in.

(10 mm)

Concrete

Summary of Contents for VLF525













































Reviews: