13
3
4
3. Drill pilot holes and remove wall plate template
15
.
IMPORTANT
: Be sure to drill into the center of the stud.
IMPORTANT
: Pilot holes must be drilled to a depth of 75 mm (3 in.), using a 5.5 mm (7/32 in.) diameter drill bit.
4.
Install wall plate
16
using lag bolts
17
and washers
19
. Tighten the lag bolts only until the washers are pulled firmly against the wall plate.
CAUTION:
Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts
.
75 mm
(3 in.)
5.5 mm
(7/32 in.)
16
17
19
15
