13
4. Place the wall plate template
12
at your desired height and position the slotted holes over your stud center line. Level the wall plate
template
12
and tape in place.
NOTE:
For assistance in determining wall plate location, see HeightFinder at sanus.com.
IMPORTANT
:
Be sure you mark and drill into the center of the stud.
5. Drill the two pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT
:
Pilot holes must be drilled to a depth of 3 in. (75 mm).
6. Partially install the TOP lag bolt
15
, leaving about 1/2 in. (13 mm) space from the wall.
NOTE:
This space allows you to remove the wall plate template
12
and hang the arm assembly/wall plate
13
onto the top lag bolt
15
.
12
14
15
12
12
4
5
6
≈ 1/2 in.
(13 mm)
3 in. (75 mm)
7/32 in.
(5.5 mm)
Summary of Contents for BMF118
Page 29: ...29...
