11
14
4X
14
2 ¾ in. (7.0 cm)
3/16 in.
(5 mm)
Place the wall plate template
14
at your desired height and position the
slotted holes over your stud center lines. Level and mark the hole locations.
4
POSITION TEMPLATE
TIP:
To calculate your precise wall plate location, check out
our HeightFinder at sanus.com [
www.sanus.com/1172
].
Drill the four pilot holes using a 3/16 in. (5 mm) diameter drill bit.
IMPORTANT:
Pilot holes must be drilled to a depth of 2 ¾ in. (7.0 cm).
5
DRILL
CAUTION:
Be sure you drill into the CENTER of the stud.
sanus.com
/1172
HeightFinder™
Visit
16