13
3. Drill pilot holes using a 5.5 mm (7/32 in.) diameter drill bit. Remove wall plate template
15
.
IMPORTANT
: Be sure to drill into the center of the stud.
IMPORTANT
: Pilot holes must be drilled to a depth of 63.5 mm (2½ in.).
4. Install wall plate
16
using lag bolts
17
. Tighten the lag bolts
17
only until the washers
18
are pulled firmly against the wall plate
16
.
CAUTION:
Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts.
3
15
63.5 mm
(2½ in.)
5.5 mm
(7/32 in.)
4
16
17
18
