Step 8: Cable Management
Before beginning wire management pull the television into the position as far from the wall as possible. Leave some slack in the cables so
that during motion there is no added tension on the connectors. There are several places to attach wire management ties to keep cords
out of the way. Wire Tie Clips (
F
) can be attached to the bottom of the Pillow Block by press fitting them into the Pillow Block. Wire Ties
(
G
) can then be added to the Wire Tie Clips, and the holes in the sides of any of the Monitor Brackets (
D
).
Diagram 8
CSAV, Inc. and its affiliated corporations and subsidiaries (collectively, “CSAV”), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein
covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to
change without notice or obligation of any kind. CSAV makes no representation of warranty, expressed or implied, regarding the information contained herein. CSAV assumes no responsibility for accuracy,
completeness or sufficiency of the information contained in this document.
Holes in
Monitor
Brackets
Pillow
Block
F