Sanus Systems VMSA Assembly Instructions Manual Download Page 1

Assembly Instructions for Model: VMSA

Thank you for choosing  a Sanus Systems Vision Mount wall mount. The VMSA is designed to mount up to 50” [1270 mm] Flat panel 

televisions  weighing up to 150 lbs. [68.2 Kg] to a vertical wall. It allows you to tilt the television from +5° to -15°. It will also extend 9.5” 

[241 mm] away from the wall, swivel up to ± 30°, and roll ± 6°.

   CAUTION:

 

The size and weight of your large screen television must not exceed 50” [1270 mm] diagonally and 150 Lbs [68.2 

Kg]. The wall must be capable of supporting five times the weight of the television plus the wall mount. Never use defective 

parts. Improper installation may cause property damage or personal injury.  Do not use this product for any purpose that is not 

explicitly specified by Sanus Systems

If  you  do  not  understand  these  directions,  or  have  any  doubts  about  the  safety  of  the  installation,  please  call  a  qualified  contractor 

or  contact  Sanus  at 800.359.5520  or  www.sanus.com.  Our customer  service  representatives  can  quickly  assist  you  with  installation 

questions and missing or damaged parts. Replacement parts for products purchased through authorized dealers will be shipped directly 

to you. Check carefully to make sure that there are no missing or defective parts. Sanus Systems can not be liable for damage or injury 

caused by incorrect mounting, incorrect assembly, or incorrect use. Please call Sanus Systems before returning products to the point of 

purchase.

NOTE: The supplied wall mounting hardware is not for metal stud, concrete, brick, or block walls. If you are uncertain about the 

nature of your wall, consult an installation contractor. Sanus makes every effort to assure all necessary television mounting 

hardware  is  included.  If  the  hardware  you  need  is  not  included  please  consult  your  local  hardware  store  or  call  Sanus 

Systems.

Required Tools:

 3/16” drill bit, drill, wrench set, phillips screwdriver

Supplied Parts: (

Some parts not shown at same scale

)

Sanus Systems 

 2221 Hwy 36 West, Saint Paul, MN 55113  06.08.06 (6901-100071)

Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

Wall Plate - A

Qty. 1

Arm Assembly - B

Qty. 1

1” Diameter Tube - C

Qty. 2

Monitor Bracket - D

Qty. 2

Vise Assembly - E

Qty. 4

Summary of Contents for VMSA









Reviews: