4 FR 1.0 - 04 2004
3/14
YOUR COFFEE GRINDER N° 4
•
The N° 4 coffee grinder is designed especially for hotels, restaurants, community
catering, for the drawer version, and for coffee roasters and roasted coffee outlets for
the "bag grip" version.
•
The robust frame of the appliance is made of cast aluminum and painted metal. The
transparent hopper is made of transparent polycarbonate transparent and contains 1
kg beans. The appliance is delivered with a "bag grip" system as standard (maximum
bag height: 280 mm), but on request there is also a model with a drawer to collect
the ground coffee (capacity 800 g).
•
A button for adjusting the fineness of the grind caters for all types of coffee grind (fine
grind, espresso, filter coffee, medium or coarse grind).
•
The special hardened steel grinding wheels (Ø 63.5 mm) guarantee a fine and even
grind.
ELECTRICAL CONNECTION
The appliance’s power supply is available in two voltages:
•
220-240V 50 Hz single phase
•
220-240V 60 Hz single phase
•
100-120V 50/60 Hz single phase
Line protection: the appliance should be connected to a standard 2-pole + earth electric
socket. The installation should be fitted with an RCD and a fuse rated
at 16A.
TAKE CARE:
•
Before plugging the appliance in, check that its operating voltage matches your
power supply and the value featured on the warranty sheet supplied with the
appliance or on the rating plate underneath the appliance.
•
If the power cable is damaged, it should be replaced with a special unit available
from SANTOS or a SANTOS-approved dealer.
Note
:
You will find it easier to understand the next few paragraphs if you
refer to the diagrams at the end of this manual
.
