Santos 06A User And Maintenance Manual Download Page 20

SANTOS : User and maintenance manual 

 

 

98140 US 3.7 - 11 2013  

 

20 

/ 20 

www.santos.fr

 

 

 

WARRANTY CERTIFICATE 

 

WARRANTY  

Since the 01.01.95, all our appliances comply with CE and possess the CE label. Our guarantee is 

of 24 months from the manufacturing date mentioned on the descriptive plate, except concerning 

the asynchronous motors (consisting of a rotor and a stator) which are warranted for 5 years from 

their manufacturing date. Warranty is strictly limited to the free replacement of any part of origin 

recognized by us as defective due to a defect or building default and identified as belonging to the 

concerned appliance. Warranty does not apply to damages resulting from installation or use non-

complying with our appliance data sheet (user’s manual) or in case of an evident lack of 

maintenance or disrespect of elementary security electric rules. It does not apply in case of regular 

wear and tear.

 

Any replacement of parts under warranty will be realized after return of the 

defective part in our workshops, postage paid, supported by a copy of a conformity statement on 

which appears the serial number of the appliance. Every appliance is equipped with a descriptive 

plate conforming to the EC recommendations and of which a duplicate exists in the conformity 

statement (serial number, manufacturing date, electrical characteristics …). In case of serious 

damage judged repairable only in our workshops, and after prior consent from our departments, 

any  appliance  under guarantee is sent by the Distributor, carriage paid. In case of repairs or 

reconditioning of appliances  not under guarantee, the round trip transport is payable by the 

distributor. The parts and workforce are invoiced at the current rate. A preliminary estimate can be 

supplied. 

Coffee grinder not using SANTOS original burrs are not taken under guarantee. The warranty 

conditions, repairs, reconditioning, of the espresso coffee grinder are the object of a specific note. 

Our guarantee does not extend to the payment of penalties, the repair of direct or indirect 

damages and notably to any loss of income resulting from the nonconformity or the defectiveness 

of products, SANTOS's global responsibility being limited to the sale price of the delivered product 

and to the possible repair of the defective products.  

In case of revelation of an imperfection during the warranty period, the Distributor has to, unless a 

different written agreement of SANTOS, indicate to his customer to stop any use of the defective 

product. Such a use would release SANTOS of any responsibility. 

 

 

APPLIANCE IDENTIFICATION PLATE 

 

 

 

SPECIMEN 

For all documents not supplied with 

the appliance. 

 

Printed, Faxed and Downloaded 

Summary of Contents for 06A





















Reviews: