background image

SANTOS : User and maintenance manual 

 

 

 

 

WARRANTY CERTIFICATE 

 

WARRANTY  

This appliance is guaranteed for twelve months from the date of manufacture appearing 
on the identification plate.  
The guarantee is strictly limited to the free replacement of any original part acknowledged 
by us as being defective as a result of a fault or a manufacturing defect and identified as 
belonging to the appliance in question.  
It does nor apply to damage resulting from an installation or use which does not comply 
with the instructions supplied with each appliance (user manual) or in the event of an 
obvious lack of maintenance or non-observance of basic electrical safety rules.  
All part replacements under warranty are made after return of the defective part to our 
workshops carriage paid, accompanied by a copy of this warranty certificate on which the 
serial number of the appliance is shown.  
All appliances have an identification plate bearing a serial number identical to that on this 
warranty certificate.  
In the event of serious damage which is deemed only to be repairable in our workshops, 
and after agreement from our services, all appliances under warranty are to be dispatched 
by the client carriage paid. If the appliance is repaired outside the warranty, the forwarding 
and return transport is the responsibility of the client. Parts and labour are invoiced at the 
prices in force (spare parts price - hourly labour cost). All repairs will be subject to a prior 
estimate which should be agreed before repair.  
In the event of a dispute, the Courts for the manufacturer's area (Lyon) alone have 
jurisdiction.  
 
 

APPLIANCE IDENTIFICATION PLATE 

 
 
 

SPECIMEN 

For all documents not supplied with 

the appliance. 

 

Printed, Faxed and Downloaded 

98140 US 3.0 - 05 2007  

 

20 

/ 20 

www.santos.fr

 

Summary of Contents for 06 - 06A





















Reviews: