manualshive.com logo in svg

SANTO Electronic Refrigerator/Freezer, Operating Instructions Manual

Share
Download
SANTO Electronic Refrigerator/Freezer Operating Instructions Manual Download Page 38

Maintenance and Cleaning

38

818 36 43-01/7

The coat of lacquer protects against finger prints and therefore 
additional cleaning agents and maintenance products are no longer 
required.

2 

Accumulation of dust at the condenser increases energy consumption. 
For this reason carefully clean the condenser at the back of the 
appliance once a year with a soft brush or a vacuum cleaner.

3.

After everything is dry place appliance back into service. 

Replacing the light bulb

3 

For safety reasons the interior lighting switches off after 7 minutes 
when the door is open. It switches on again the next time the door is 
opened. 

1 

Warning!  

Danger of electrical shock! Before replacing the light bulb 

switch off the appliance and remove the mains plug.

Light bulb specifications: 220-240 V, max. 25 W, fitting: E 14 

0

 

1.

To switch the appliance off press and hold the ON/OFF button.

2.

Unplug the mains plug.

3.

To change the light bulb, undo the 
cross head screw and remove the 
light bulb cover downwards.

4.

Change the defective light bulb.

5.

Refit the light bulb cover and the 
cross head screw.

Summary of Contents for Electronic Refrigerator/Freezer













































Reviews:

No comments

Brands by name

Popular brands

Load more brands