SANTI Battery 24Ah, User Manual

Page: 15 / 27

SANTI 24Ah battery Product specification
6.01 6.02
SANTI battery is developed based on modern Li-Ion cells, with high current efficiency. Battery
is designed to supply power to SANTI heated apparel (undersuit, vest, gloves). However, it
may be also used with diving lights.
Total power of connected devices must not exceed 200W. Those devices must be designed
to be powered with 10.8-12V input.
Calculated operating time when equipment is in use:
• heated undersuit (110W): 2h30min ~ 3h
• heated vest (55W): 5h ~ 6h
• heated gloves (36W): 9h ~ 10h
• undersuit with gloves: 2h ~ 2h15min
• vest with gloves: 3h15min ~ 3h45min
The battery is equipped with a number of safeguards to protect against excessive discharge,
excessive charging, overload and short circuit. On the top section of the canister there are an
E/O cord connector, piezo switch, overpressure valve. There is also a belt loop (no need for
clamps) on the side of the housing.
One touch is enough to turn battery on, which is indicated by built-in blue LED on the E/O cord
connector. After each switch-on power status is presented. Number of flashes emitted by blue
LED informs about the charge level.
Maintenance-free battery, do not open.
Opening the housing results in loss of warranty.