SINUS PENTA
MODULAR INVERTERS
ASSEMBLY INSTRUCTIONS
17/
47
N. 9 optical fibre connections, 1mm, standard double plastic material (typical damping 0.22dB/m), with
connectors type Agilent HFBR-4516.
Figure 9: Double optical fibre connector
Connections required:
-
from control unit to splitter unit in inverter leg U1 (gate U signal)
-
from control unit to splitter unit in inverter leg V1 (gate V signal)
-
from control unit to splitter unit in inverter leg W1 (gate W signal)
-
from splitter board in inverter module U1 to inverter leg U1 (phase U1 gate signal)
-
from splitter board in inverter module V1 to inverter leg V1 (phase V1 gate signal)
-
from splitter board in inverter module W1 to inverter leg W1 (phase W1 gate signal)
-
from splitter board in inverter module U1 to inverter leg U2 (phase U2 gate signal)
-
from splitter board in inverter module V1 to inverter leg V2 (phase V2 gate signal)
-
from splitter board in inverter module W1 to inverter leg W2 (phase W2 gate signal)
