Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW,
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 57 -
4.3 Access to mini-joystick and OSD setting
All camera adjustments are done via an OSD menu using a mini-joystick. Access the mini-
joystick as follows (see pictures 1 and 3):
Loosen the security screw on the housing. Pull the housing off. On the camera board, you
will fin a mini-joystick for OSD settings and the additional video connection. Press onto the
joystick and a menu pops up in the video picture. You can now move the joystick
left/right/up/down in order to get to the desired menu item. For confirming your choice, press
onto the joystick.
See chapter 8 for „Camera settings via OSD menu“.
Once all settings are made, put the housing back onto the camera and tighten the security
screw again carefully.
Finally, clean the camera dome to remove fingerprints and other stains.
4.4 Lens setting
Lens control (focal length and focus) is done by the two setting rings.
Carefully loosen the two safety screws a bit so that you are able to turn the setting rings.
Adjust the lens according to your needs. Finally, seize the two safety screws again carefully.
See picture 4.
