User manual SanStore-4EM / SanStore-8EM
_________________________________________________________________________________
- 34 -
6.6 Alarm recording
Please verify the alarm record settings prior to starting the alarm recording. Please note that
the alarm recording is independent of any recording modes. Alarm record starts after the
alarm recordind has been enabled.
6.6.1. Recording setup
1.
Use the direction buttons [
] to select
the “ALARM” menu. Then press the
[ENTER] button to display “Alarm Record Setup”.
2.
Use the left/right buttons [
] to select a tab menu (
).
3.
Use the direction buttons [
] to select the camera you wish to configure.
4.
Use the [-, +] button to change the value.
ITEM
ADJUSTMENT
USE
Enable or disable the recording per camera.
QUALITY
Specify the picture quality for each camera.
ULTRA
SUPER
HIGH
MIDDLE
LOW
RATE
Select recording rate of each camera when an alarm is triggered.
AUDIO
Set the audio recording to ON or OFF.
MOTION
Specify the type of alarm input device.
Note:
Press the [MENU] button at the beginning of each item to copy all settings to the
other channels.
5.
Press [ENTER] to save the changes and to exit the menu.
Press [CANCEL] to exit the menu without saving the changes.
