Bedienungsanleitung / User manual
AB-81-485, ABO-PWR-81-485
_________________________________________________________________________________
- 23 -
5. DIP switch
The alarm box is configured by DIP switches. The DIP switches are located on the board
inside the alarm box.
5.1 DIP switch: Settings
Procedure:
Before setting the DIP switches, please disconnect the alarm box from the power
source.
Open the housing (loosen 4 screws).
Carefully pull the board out of the housing.
The DIP switches can now be set (also see the following chapters).
Once you have set all DIP switches, carefully put the board back into the housing
(pay attention to the board slide).
Put the screws back into the housing and tighten them.
Re-connect the alarm box to the power source.
5.2 DIP switch: Arrangement on board
DIP-SW-1
DIP-SW-2
DIP-SW-3
DIP-SW-4
