Santana Stowaway, Assembly And Disassembly

Page: 3 / 8

27. Position the front derailleur shifter, so the derailleur is in the innermost position. Thread the cable through the
slotted cable guide on the drive side of the down tube, and screw the barrel adjuster into the guide. Contin-
ue through the drive side guide, with the Teflon
®
tubing, on the eccentric, front, bottom bracket shell. Cross
the cable, and join, with the Quick Connect, to the front derailleur cable through the center guide, with the
Teflon
®
tubing, on the rear bottom bracket shell.
28. Position the rear derailleur shifter, so the derailleur is in the outermost position. Thread the rear derailleur
cable through the slotted cable guide on the timing side of the down tube (If equipped with a hydraulic disc
brake, thread the rear derailleur cable through the middle guide.), and screw the barrel adjuster into the
guide. Continue through the timing side guide (or center guide if a hydraulic brake), with the Teflon
®
tubing,
on the eccentric, front, bottom bracket shell . Cross the cable, and join, with the Quick Connect, to the rear
derailleur cable through the drive side guide, with the Teflon
®
tubing, on the rear bottom bracket shell.
29. Fine adjust the brakes and derailleurs with the adjusters on the front of the frame.
30. Assemble the remaining parts, making sure the seat post clamps and both handlebars are firmly tight. Do
not over tighten. Re-check all other connections to insure that they’re tight.
31. Inflate the tires to the pressure on the sidewalls.