.
.
FEATURES:
1.
12.5 mm Green LED Display
2.
High internal resolution
3.
Built in battery back up 6V/4.5Ah
4.
Protected with internal calibration
5.
In built battery charger circuit
6.
5 key keypad
7.
Overload indication
8.
Low bat indication
9.
Accumulation function
10.
SS top platter
11.
Check weighing function with Tower light indication
12.
In built RTC(real time clock)
13.
In built USB Interfacing
14.
Heavy MS powder coated body
15.
Application : Packing industry
ERROR INDICATIONS:
1. Overload Indication: when the scale is overloaded more than its max capacity, then the
Display screen will indicate “---”.
2. Low-battery Indication:when the battery power is low and requires battery charging, then the
Display screen will indicate “Lo-bat”.
BASIC SAFETY PRECAUTIONS:
• Pay attention to the instructions in the User Manual. Carefully read this user manual before
setup and commissioning, even if you are already familiar with SANSUI Weighing scales.
• The appliance may only be operated and maintained by a trained person.
• Do not use this scale in a hazardous area/location.
• The only way to switch the power off completely is to disconnect the Power.
• Connect only Sansui accessories and options, as these are optimally designed for use with
your Sansui scales.
• Do not open the scale/scale housing. If the seal is broken, this will result in forfeiture of all
claims under the manufacturer’s warranty.
• If you have any problems with your scale contact your local Sansui office, dealer or service
center
• You will work accurately and fast, if you select the right location for your scale. Therefore,
observe the following for the installation site:
➢
Place the scale on a firm, level surface; Avoid extreme heat as well as temperature fluctuation
caused by installing next to a radiator or in the direct sunlight;
➢
Protect the scale against direct draughts due to open windows and doors;
➢
Do not drop loads on the platform.
SANSUI Electronics Pvt. Ltd.
9823-888-888 | [email protected]
