Sansui SLED5000, Owner'S Manual, Page: 14 / 31

EN
14
To connect the TV to a PC (Personal Computer)
BEFORE YOU CONNECT THIS TV TO YOUR PC, CHANGE THE ADJUSTMENT OF YOUR PC’S
RESOLUTION AND REFRESH RATE ( 60 HZ ) .
Connect one end of a (male to male) VGA cable to the video cord of the computer and the other end to the VGA
connector PC MONITOR IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In case
of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to the
AUDIO IN (L/R) connector of the AUDIO IN (L/R) jack of the TV. You can also connect the PC with HDMI cable.
If you use HDMI cable, you don’t have to connect the audio cord. If you use DVI-to-HDMI cable, please connect
audio cord as same way as VGA cable.
Press INPUT SELECT on the remote control to select PC mode.
Switch on the computer. The TV can operate as the computer monitor.
Monitor Display modes
Mode Resolution Refresh rate
VGA 640x480 60/ 75 Hz
VGA 720x400 70Hz
SVGA 800x600 60/ 75 Hz
XGA 1024x768 60/ 70/ 75 Hz
WXGA 1360x768 60Hz
SXGA 1280x1024 60Hz
WXGA+ 1440x900 60Hz
WSXGA+ 1680x1050 60Hz
FHD
1920x1080 60Hz
To return to normal mode
Press INPUT SELECT again.
Connections to other equipment
NOTE:
The on-screen displays will have a different appearance in PC mode than in TV mode.
If there is no video signal from the PC when the unit is in PC mode, “No Signal” will appear on the TV-screen.
When the PC’s resolution is set to 1920 x 1080/60 Hz (FHD mode), a signal that differs from the FHD signal,
which has been confirmed operational on this TV, may appear depending on the PC used. In this case, “Auto”
or other Position Adjustment functions may fail to correct the image position.
To solve this problem, change the PC settings to select another resolution.
•
•
•
VGA cable (not supplied)
HDMI cable (not supplied)
To HDMI IN
To PC
MONITOR IN
To AUDIO IN
Audio cord (not supplied)
Rear and right of the unit
To connect an audio system
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the
TV’s remote control.
To Audio (L) Input
To Audio (R) Input
Audio cord (not supplied)
Amplifier
Right of the unit
To AUDIO (L/R) OUT
J3QE0121A_EN.indd 14 J3QE0121A_EN.indd 14 12/14/12 6:03:35 PM 12/14/12 6:03:35 PM