Page | 12
© Sansui UK 2012 SAP201V IB Ver 1.0 Rev 0.0
Correct Connection of Speakers
-
There are two ways to connect speaker cables to the connection terminals on the amplifier. Either by
connecting bare wire or by using cables with terminal connectors fitted.
Bare Wire Method
-
Strip away approx. 5/8 inch (15 mm) of insulation from the ends of the speaker cables, and twist the bare wires
tightly.
-
Loosen the screws on the speaker terminals, insert the wires, and screw the terminals tight.
Caution
- Make sure that the wires do not touch metal parts on the back panel or elsewhere.
Terminal Connectors Method
-
For a much improved speaker cable connection it is
advisable to use speaker cables with terminal connectors
fitted such as banana plugs as shown on the right.
-
Connect the speakers as shown in the drawing below. Connect the positive speaker wire to the
RED
+
positive
terminal on the unit, and the negative speaker wire to the
BLACK
–
negative on the unit.