background image

13

To connect the LCD TV to a VCR with an S

-

Video cord

If you connect a VCR with a S-Video cable to the S-VIDEO IN jack on the rear side of the unit, you must also 

connect the audio cables to the AUDIO IN jacks on the rear of the unit.

The S-Video cable only carries the video signal. The audio signal is separate.

NOTE:

When the S-Video cable and the standard video cable are connected at the same time, the S-Video cable 

takes precedence.

Y

Pb

Pr

Y

Pb

Pr

The exact arrangement you use to interconnect various video and audio components to this unit is dependent 

on the model and features of each component. Check the Owner’s Manual provided with each component for 

the location of video and audio inputs and outputs.

To connect the LCD TV to a VCR

Connections to other equipment

To connect to a DVD player with Component Video Input

You can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVD 

player with the COMPONENT video cables (not supplied).

Rear of the unit

To Video/Audio OUT

Video/Audio cord (not supplied)

To LINE1 

VIDEO/AUDIO IN

To Component OUT

Audio cord

(not supplied)

Component video cord

(not supplied)

To LINE2 AUDIO IN

To COMPONENT IN

To Audio OUT

NOTE:

Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and 

480p/720p progressive signals.

VCR

DVD

or

To connect the TV to a camcorder, or a TV Game

To playback from a camcorder, connect the camcorder to the unit as shown.

This unit can also be used as a display device for many video games. However, due to the wide variety of 

signals generated by these devices and subsequent hook-up variations required, they have not all been 

included in the suggested connection diagrams. You’ll need to consult each component’s Owner’s Manual for 

additional information.

Rear of the unit

Video/Audio cord (not supplied)

To LINE1 VIDEO/

AUDIO IN

To Video/Audio OUT

Rear of the unit

To S-Video OUT

To Audio OUT

Audio cord (not supplied)

S-Video cord (not supplied)

To S-VIDEO IN

To LINE1 AUDIO IN

Rear of the unit

VCR

ENGLISH

38B0121A_En.indd   13

38B0121A_En.indd   13

3/9/09   5:49:17 PM

3/9/09   5:49:17 PM

Summary of Contents for HDLCD4212



























Reviews: