Sansui DTV2700 Owner'S Manual Download Page 39

39

LIMITED WARRANTY

R

ORION warrants this product to be free from manufacturing defects in material and workmanship under

normal use and conditions for a period of 90 days from date of original purchase in the United States.

Should service be necessary under this warranty for any reason due to a manufacturing defect or mal-

function during the first (90) ninety days from date of original purchase, ORION will provide carry-in repair service
by an ORION authorized Independent Service Center at no charge.  Also, if an original part fails due to manufac-
turing defect in material and workmanship within one year from date of original purchase (two years from date of
original purchase for picture tube) we will replace the defective part only (LABOR NOT INCLUDED AFTER THE
INITIAL NINETY (90) DAY WARRANTY PERIOD) provided the defect or malfunction is verified along with dated
proof of purchase.

There are ORION authorized Independent Service Centers located throughout the country.  For the one

nearest you, DIAL TOLL FREE: 1-800-289-0980 or visit our website at www.orionsalesinc.com. This product is
eligible for CARRY-IN service only.  ORION will not be liable for damages incurred in shipment of the unit.  If there
are no ORION authorized Independent Service Centers in your area please call – 1-888-296-7466 for assistance.

Note: This warranty is void if the product is:

(a)

Damaged through negligence, misuse, abuse, or accident.

(b)

Used in a commercial application or rentals.

(c)

Modified or repaired by anyone other than an Independent Service Center authorized by
ORION to effect warranty repairs to the class of product or by the ORION Factory Service Center.

(d)

Damaged because it is improperly connected to the equipment of other manufacturers.

This warranty does not cover:

(a)

Damage to equipment not properly connected to the product.

(b)

Costs incurred in the shipping of the product to an ORION authorized Independent Service Center or
ORION Factory Service Center.

(c)

Damage or improper operation of unit caused by customer abuse, misuse, negligence, or failure to follow
operating instructions provided with the product.

(d)

Ordinary adjustments to the product which can be performed by customer as outlined in the owner’s manual.

(e)

Signal reception problems caused by external antenna or cable systems.

THIS WARRANTY IS NON TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER

AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A
PERIOD OF THE EXPRESS WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGI-
NAL PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED SHALL APPLY TO
THIS PRODUCT THEREAFTER. ORION MAKES NO WARRANTY AS TO THE FITNESS OF THE PRODUCT
FOR ANY PARTICULAR PURPOSE AND USE.

UNDER NO CIRCUMSTANCES SHALL ORION BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT, IN-

CIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE
USE OF THIS PRODUCT.

THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA. THIS WARRANTY

GIVES YOU SPECIFIC LEGAL RIGHTS, HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY
FROM STATE TO STATE.  SOME STATES DO NOT ALLOW LIMITATION ON IMPLIED WARRANTIES OR
EXCLUSION OF CONSEQUENTIAL DAMAGE, THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO
YOU.

ORION SALES, INC.

3471 N. UNION DR.

OLNEY, ILLINOIS 62450

J3W40101A_En_p35-back

17/11/05, 9:12 AM

39

Summary of Contents for DTV2700









































Reviews: