Sansec HSM User Manual V2.2
8
4.
Installation
4.1.
Installation
a)
Open the HSM installation package and check the contents list to make sure that
your set is complete with all of the equipment and accessories.
b)
Remove the machine from the package and set it up in an appropriate installation
location.
c)
Connect the device to a power supply.
d)
Turn on the device by pressing the power button and startup the machine.
4.2.
Device management
a)
Use the serial port control cable to connect the HSM to a personal computer with
Windows operating system installed.
b)
Run the "HyperTerminal" tool that comes with the Windows operating system,
which can be found from the "Start menu" -> "All Programs: -> "Accessories" ->
"Communication" -> "HyperTerminal". You can also use other terminal software
with a serial port connectivity function, such as SecureCRT, PuTTY, NetTerm
and so on.
c)
Select "New Connection", then select the corresponding COM port. On the "Port
Settings" part of the " per second number", select the baud rate value of "38400"
as the following picture shows:
