Replacing Filters
Follow these steps to replace the filters in your Sans Water Purifier:
Remove the lid by first lifting the hinged flap covering the tap water
tank and then lifting it off completely.
1.
Remove the tap water tank using the built-in handle to pull upwards.
2.
To replace either the Pre/Carbon or RO filter, identify the filter you are
replacing and lift the hinged tab securing the filter.
3.
Pull the filter outwards and replace with the new filter
4.
To replace the VOC Carbon filter, first follow steps 3 and 4 to remove
the RO filter. The VOC Carbon filter is located behind and hinges out
from the top. One pulled out, unscrew to remove.
5.
When replacing the Pre/Carbon and RO filters, re-secure the hinged
tap after inserting the filter by pressing it down until it clicks.
6.
After replacing a filter, reset the Replace Filter indicator by tapping the
Reset button to select the replaced filter. Tap and hold to reset.
7.
Summary of Contents for PURE
Page 1: ...PURE WATER STARTS HERE...
