SanRex CALPOTE UG Series, Instruction Manual

Page: 31 / 97

31
ESC key Returns to the previous item.
UP key
DOWN key
‘Select parameters’or‘increase/decrease the value’
LEFT key
RIGHT key
Change the selected digit of a value.
SAVE key
Applies changed on values.
PHASE key For the UG1, this key is not used.
7.2 Operations
This section describes basic operations common to all modes. Details are explained in the
section of each mode on the following pages.
Selecting and displaying modes and items

The lit mode LED changes every time [MODE] is pressed.

Press [▲] or [▼] to select an item.
 Press [ENTER] to display the next item selection or value.
 Press [ESC] to return to the item selection.