Sanremo CAFE RACER Instruction Booklet Download Page 42

Use and maintenance instructions  

CAFE’ RACER 

GB 

42 

21 - TECHNICAL ASSISTANCE AND 
SPARE PARTS  

• For spare parts and all problems regarding the 
machine, contact an authorised dealer only.   

• If repairs are required, use original spare parts 
only to guarantee that the machine's technical 
specifications remain unaltered over time.   

• To order spare parts, follow the instructions in 
the spare parts catalogue.   

 

22 -  SCRAPPING THE MACHINE  

To  protect  the  environment,  proceed  in 
accordance with the regulations and standards 
in force in the country concerned.   

When  the  appliance  can  no 
longer  be  used  or  repaired, 
the  components  should  be 
separated for disposal.   

Electrical  appliances  may 
not be disposed of as urban 
waste,  but  must  be  treated 

separately in respect of the European directive 
on  Waste  Electrical  and  Electronic  Equipment 
(2002/96/EC - 2003/108/EC)  

  

Electrical equipment is marked with a crossed-
through wheelie bin symbol.  This indicates that 
it  was  introduced  onto  the  market  after  13 
August  2005  and  must  be  disposed  of 
separately.   

In  light  of  the  constituent  substances  and 
materials, inappropriate or illegal disposal of the 
equipment,  or  its  improper  use,  may  cause 
damage to persons and the environment.   

Electrical  waste  disposal  which  does  not 
comply  with  the  regulations  in  force  is 
punishable  by  administrative  and  penal 
sanctions.   

 

 

 

 

23 -  DISPOSAL OF HARMFUL 
SUBSTANCES  

To  dispose  of  these  substances,  consult  the 
regulations  in  force  in  the  country  concerned 
and proceed accordingly.   

 

IMPORTANT: For information on the 
disposal  of  harmful  substances 
(lubricants,  solvents,  paints,  etc.) 
please  consult  the  following 
paragraph. 

 

IMPORTANT:  Any  irregularities 
committed  before,  during  or  after 
scrapping  and  disposal  of  the 
machine's  components  and  in 
interpreting  and  applying  the 
regulations  in  force  is  the  sole 
responsibility of the customer. 

 

Summary of Contents for CAFE RACER













































Reviews: