SANPLAST CLASSIC 2 AIR, Manual

Page: 24 / 32

24
WHIRLSYSTEM
24
GB
4. AVAILABLE FUNCTIONS AND EQUIPMENT
Available functions and equipment symbol
AIC2
Air system
AQC2
Aqua system
MXC2
Mixed system
Electronic steering
Available functions:
Turn off all functions
aqua massage - ON/OFF electronic button (turn on/turn off) —
air massage - ON/OFF electronic button (turn on/turn off) —
underwater lighting - ON/OFF electronic button (turn on/turn off)
medium closed water jets with water outflow regulation
for body and legs massage
sides
of bathtub
— 6 6
Small flat water jets
with water outflow direction regulation
back — 4 4
feet — 2 2
small air jets with peripheral outflow
bottom of
bathtub
10 — 10
Small air jet with multipoints water flow
back 6 — —
feet 2 — —
IPX5 water pump — 700 W 700 W
air pump 700 W 700 W — 700 W
Underwater Power LED lighting ● ● ●
drain with suction — ● ●
Anti-vibrational shock absorbers under the pumps ● ● ●
Flexible pads for frame ● ● ●
Water system aeration — ● ●
20 minutes pre-programmed massage time ● ● ●
„Dry run” protection
System is equipped with electronic sensor of water level, which protects the system for
operation "dry-run" and for lamp over-heating, if it is installed - look at the "Available
options"
Note!!
For proper system functioning befor it is on bathtub should be filled with water 3-4
cm above the level of the highest positioned jets.
● ● ●
Automatic drying of air ducts and jets ● — ●