Application number: 184338
Page 45 of 48
Date of revision: August 18, 2011
s-a Version 2.1 dated August 26, 2011
Replacing the Batteries
[1]
Open Battery Door:
Make sure the meter is deactivated. Turn the meter so you are looking at
the battery door. Press the battery door clip to open. Remove the battery door. Be careful not to
misplace the battery door.
[2]
Remove and Install the meter battery:
To remove the used battery, pull the appropriate tab
to pop out the battery. Install the new battery with the positive (+) sign facing up towards you.
[3]
Remove and Install the backlight battery:
To remove the used battery, pull the appropriate
tab to pop out the battery. Install the new battery with the positive (+) sign facing up towards you.
[4]
Close Battery Door:
Angle the battery door back onto the meter and swing down until it
snaps gently into place. Make sure that the battery door is completely closed before using.
IMPORTANT: When the meter is deactivated and you are replacing battery #2, the time and
date information may be lost after the battery is removed from the meter. If this happens,
activate the meter after installing the new battery and it will prompt you to set the time and
date.
Time and Date Setting After Battery Replacement
If the date and time need to be set, the word “SET” will be displayed the first time the meter is
activated.
Note: The meter retains the date and time format [24 or 12 hour time, M-d (Month-Day) or d-M
(Day-Month)]