SANO UNIKAR, Instruction Manual

Page: 5 / 8

UNIKAR I 5
3 MAINTENANCE
UNIKAR is equipped with a maintenance-free lifting belt (instead of a rope or a chain). Normally the UNIKAR is
maintenance-free, but if it is very frequently used, you could put a bit of graphit grease on the trapez thread of
the handle. Therefore turn the handle anti-clockwise with a load of minimum 20 kg till the handle gets off from
the thread.
Also the rear wheels can be greased.
ATTENTION
Do not grease the friction surface of the handle!
Then turn the handle clockwise till it lifts the load again.
4 EC DECLARATION OF CONFORMITY FOR
MACHINERY
herewith declares that the described machine is in conformity with the provisions of the Machinery directive as
amended, and with national implementing legislation.
Directive 2006/42/EC
In case of a modification without our acceptance this declaration looses its validity.
Harmonized standards applied:
EN 12100-1
EN 12100-2
Ing. Jochum Bierma, general manager