NEO Liftkar SAL I 9
2.5 THE SWIVEL JOINT (FOLD / FOLD-L)
The necessary friction for the rotary joint is obtained through multiple friction disks, which are compressed
simultaneously on the left and right sides. The lock must be tightened sufficiently to avoid movement in use.
As a rule: The lock will be sufficiently tightened if a single operator can tilt back the load from the upright
position without any handle movement.
SAFETY INSTRUCTION
With heavy loads (over 100 kg) ensure the lock is tightened especially firmly.
2.6 CONTROL UNIT
1: Up indicator - 2: Down indicator - 3 Up/Down button - 4: ON/OFF button / Status indicator - 5: Speed button /
Stair light - 6: Speed indicator fast - 7: Speed indicator slow
2.6.1 BUTTON FOR ASCENDING / DESCENDING
Briefly press the push button to switch the LIFTKAR SAL to ascent mode or descent mode.
2.6.2 ON/OFF BUTTON / STATUS INDICATOR
Green light on: The LIFTKAR is switched on. (In up mode, the button in the handlebar is active. The climber
mechanism switches on when the button is pressed and stops when it is released - see also chapter
Operation
4.1
)
Constantly red: The LIFTKAR is in descent mode and the support wheels move (fast) to the descend position
(takes a max. of 0.5 seconds – refer also to chapter
4.2
)
Flashing red: The LIFTKAR is overloaded. (Flashes for 3 seconds and goes out – see also chapter
4.3.3
)
Alternating red and green: the battery pack is running low and urgently needs to be recharged. It is
recommended that you move down stairs and either change the battery pack or recharge it with the quick
charger supplied.