Liftkar HD I 15
4 OPERATION
4.1 CLIMBING UP STAIRS
Fit battery pack, switch main switch to ON, press briefly on multi-function switch P until the LED display goes
permanently green (Single-step mode, refer to section
2.5.1.
), or flashes green (Continuous mode).
The LIFTKAR is now ready for operation.
Pressing one of the UP/DOWN switches Q (
figure 6
, left and right of handlebar, arrow upwards points towards
operator) starts moving the lift arm with the support wheels and lifts the LIFTKAR onto the next step. The cycle
is repeated until the switch is released (Continuous mode, LED flashes green). In Single-step mode the LIFTKAR
stops when the main wheels reach the next step.
IMPORTANT
As soon as the main wheels have "landed" on the next step, always draw the unit away from the
edge of the step and contacts the step above.
4.2 CLIMBING DOWN STAIRS
Fit battery pack, switch main switch to ON, press briefly on multi-function switch P until the LED display goes
permanently green (Single-step mode, refer to section
2.5.1.
), or flashes green (Continuous mode).
The LIFTKAR is now ready for operation.
Pressing one of the UP/DOWN switches Q (
figure 6
, left and right of handlebar, arrow downwards points away
from operator) starts moving the lift arm with the support wheels and lowers the LIFTKAR onto the next step.
The cycle is repeated until the switch is released (Continuous mode, LED flashes green). In Single-step mode the
LIFTKAR stops when the main wheels reach the next step.
IMPORTANT
As soon as the main wheels have landed on the step, always push the Liftkar to the edge of the
next step. The brake wheels stop the Liftkar reliably on the edge of the step.
