U S E R M A N U A L
Version 2 17/11/2017
© Jenlogix 2017 Jenlogix
Page 6 of 40
3.2 NETWORK SETTINGS
IP of the unit and the gateway to enable data to be sent externally
If the unit is being used as data storage, it is recommended to keep the DHCP off if possible
if you wish to connect using other utilities. Otherwise the IP address will need to be found
before retrieving any data and do any changes. But it is not essential to have a static IP if the
unit is being used just as an Alarm system.
This screen provides the ability to change the IP address of the unit. Once changed you may need
to reset the subnet of the PC connection to continue.
