Sanli Self-Propelled 4-in-1 User Guide
7
Fitting the side chute
Lift the flap, placing the two hooks under the axis of the hinge (see fig. 8) and let the flap
return to hold the chute in place. (See fig. 9)
Fig. 8
Fig. 9
In its transmission-engaged position, the mower’s advance lever is pushed fully towards
the handlebar (see fig. 6). An incorrectly-adjusted transmission cable can cause
premature wear to the mower’s drive system.
If the transmission cable is too tight, it will be difficult to move the advance lever
towards the handlebars. Conversely, if the transmission cable is not tight enough, the
transmission will function poorly and will lack power.
To adjust the tension of the cable transmission, increase or reduce the length of
the adjustment device using the wrench (see fig. 7). Check the effectiveness of the
transmission and the resistance of the lever. Once proper adjustment has been reached,
secure the adjustment device by tightening the lock nuts.
Note: There should be about 2 cm of free-play before the advance lever engages drive.
Start to move forward manually and then slowly engage the advance lever. The mower
should begin to move forwards gradually from that point onwards.
Fig. 6
Fig. 7
Fitting and adjusting the throttle cable
