SANJIANG JTY-GD-01K, User Manual, Page: 8 / 13

Version ： 170720
SANJIANG ELECTRONICS
6
of one battery and the black wire with “ - ” pole of another battery, then use one wire to connect the batteries in
series.
Note: Installation sequence of the storage batteries: first fix the batteries in the box, then connect
the wires as is shown in figure 9, otherwise it may cause short circuit easily.
V. Description of the Control Panel
Schematic diagram of JB-QB-QM200/4 panel is shown in figure 10
Thereinto:
1: Main panel
2: panel of area 1
3: panel of area 2
4: panel of area 3
5: panel of area 4
Note: In JB-QB-QM200/3, 5 is blank panel, in JB-QB-QM200/2, 4 & 5 are blank panel.
There are 12 indicator lights on the main panel of JB-QB-QM200/4; the introduction below:
◎
POWER
Any input of power supply (AC or DC) in the system, this light will be on.
◎
AC TROUBLE
When this light is on, one or more situations described below may occur:
l Open circuit of AC input
l AC low or high (not in the range of AC187V
－
AC242V)
l Trouble of PS-06 power module
◎
DC TROUBLE
The light is on when the battery connection is in open circuit or DC voltage is lower than 22V.
◎
SYSTEM RELEASE
When anyone area enters release status and start up the electromagnetic valve, this light will be on.
◎
SYSTEM FIRE
When any detector zone finds fire alarms, this light will be on.
◎ SYSTEM TROUBLE
When the system detects abnormity (such as AC/DC trouble, release trouble, zone trouble etc.), this light
will be on.
◎
AGENT LEAK
(Reserve indicator light)
◎
MANUAL
When the system is in manual status, this light will be on.
◎
AUTO
When the system is in automatic status, this light will be on.
◎
KEY ON/OFF
When the key is on, this light will be on.
◎
SILENCE
Press the key to eliminate alarm sound and this light will be on.
◎
PAUSE
When the system enters pause status, this light will be on.
JB-QB-QM200/4 panel area n (n=1-4) has 12 indicator lights and 2-bit digital display, the introduction below:
◎
ZONE X (X= 1 or 2) FIRE
When the system detects fire alarm in zone X , this light will be on.
◎
ZONE X (X= 1 or 2) TROUBLE
When the system detects any trouble in zone X, this light will be on.
◎
EMERGENT STOP
12V 7Ah Battery 12V 7Ah Battery
+
+ -
-
Red
Black
Red
Figure 9