Sanitas SMA 36, Instructions For Use Manual

Page: 17 / 64

17
4. Cleaning/care
Before cleaning the power unit, always unplug it from the socket outlet!
– Clean the instrument with a slightly moistened cloth. You can also
moisten the cloth with mild soap suds to remove more stubborn dirt.
– If necessary, for reasons of hygiene, the attachments can be cleaned with
a cloth or brush moistened with alcohol. Dry them carefully afterwards.
– Do not drop the instrument.
– Make sure that no water enters the instrument. But if this should happen,
do not use the instrument again until it is completely dry.
– Do not use chemical detergent or scouring agents for cleaning.
– Never immerse the instrument or plug-in power unit in water or other
liquids.
5. Disposal
For environmental reasons, do not dispose of the device in the house-
hold waste at the end of its useful life. Dispose of the unit at a suitable
local collection or recycling point. Dispose of the device in accordance
with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If
you have any questions, please contact the local authorities responsible for
waste disposal.
6. Technical specifications
Supply
Input:
Output:
100-240 V~ 50/60 Hz 0.5 A
30.0 V 0.25 A; 7.5 W
Average active efficiency:
≥ 80.3 %
No-load power consumption: ≤ 0.09 W
Speed: 3,800 - 4,600 +/- 15%
Device dimensions: 15.2 x 3.7 x 3.7 cm
Weight:
Mains part: approx. 93 g
Device: approx. 100 g
Subject to technical changes
Subject t
o err
ors and changes