background image

5

Important:

Check the results during treatment. This is particularly important 
for diabetics, since their hands and feet are less sensitive.

3.2 Attachments

As these are attachments for use by professionals, we would ask you to 
handle them with care as they can cause injury when used incorrectly. Par-
ticular caution is advised at higher speeds.

The following attachments are provided with your appliance:

When filing, always work from the outside of the nail towards the tip!

1 – Sapphire disk, fine

Filing and treatment of the nails, fine grained sapphire 
disk. The specific aspect of this sapphire disk is that 
only the inner disk rotates, while the outer support is 
stationary. This enables precise filing of the nails without 
the risk of burning the skin with the fast rotating disk. 

2 – Sapphire disk, coarse

Filing and treatment of the nails, coarse grain sapphire 
disk. This attachment allows you to shorten even thick 
nails by filing. Since it quickly removes large areas of the 
nail, you should proceed with caution in this case also.

3 – Sapphire cone

Removal of dry skin or calluses from the soles of the 
feet and from the heels and for manicuring the nails.

4 – Felt cone

Smoothing and polishing the edge of the nail after filing 
as well as for cleaning the nail surface. Always polish 
in circular movements and do not allow the felt cone to 
rest in one place, otherwise friction could cause heat to 
develop.

!

5 – Sapphire callus rasp

For rapid removal of stubborn calluses and hard skin on 
the soles of feet and heels This attachment can be used 
on large areas.

 

 

 

Summary of Contents for SMA 35









Reviews: