6
MAINTENANCE GUIDE
To receive reliable service from this equipment,
regular daily maintenance is required.
1. Keep the equipment clean, both inside and
out.
2. Lubricate brass quick disconnects with a
quality lubricant. (Fig 9)
3. Flush solution systems after use with clear,
clean water. (A white vinegar solution of 1 part
vinegar to 8 parts water may also be used). This
will counter-act hard water and alkaline deposits
and aid in keeping orifices clean.
4. Do not allow fluid, either in solution or waste
tank, to sit overnight. The unit should be emp-
tied and cleaned daily.
5. Clean the strainer in the solution tank, the
filters on the vacuum stack in vacuum tank, and
all lint filters in the inlet or vacuum tanks daily.
(Fig 10)
6. When the unit is not in use, leave the vacuum
tank lid open. (Fig 11)
7. At the end of each day, run the vacuum for
3 minutes with lid open and filter off. (Figs 11 &
12)
Fig 9
Fig 10
Fig 11
Fig 12
CAUTION -
Do not operate without the filter
and ball float valve in place.
For cleaning machines, parts & supplies click/visit www.southeasternequipment.net
For cleaning machines, parts & supplies click/visit www.southeasternequipment.net
